B&C 12NDL88 12-Inch Speaker Driver - 700W RMS, 8 Ohm, Spring Terminals

The B&C 12NDL88 12-Inch Speaker Driver is perfectly balanced for the loudspeaker systems of today. Incorporating a high temperature neodymium magnet inside the 3.5-inch (88mm) voice coil reduces the amount of steel needed in the motor structure, saving cost and weight. Unexpected low frequency output and midrange extension to meet with almost any driver for two way applications is the hallmark of this new performance-oriented woofer line from B&C Speakers. Do more, with less, with the NDL88 series.

Recone Kit: JP101947 (B&C RCK12NDL888)

B&C 12NDL88 12-Inch Speaker Driver Features

- 1400 W continuous program power capacity
- 88 mm (3.5 in) aluminium voice coil
- 50 - 3000 Hz response
- 98 dB sensitivity
- Waterproofed on front of cone
- Aluminium demodulating ring allows a very low distortion figure
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression

B&C 12NDL88 12-Inch Speaker Driver Specifications

- Nominal Basket Diameter: 320 mm (12.6 inches)
- Nominal Impedance: 8 Ω
- Minimum Impedance: 6.0 Ω
- Nominal Power Handling: 700 W
- Continuous Power Handling: 1400 W
- Frequency Response: 50 - 3000 Hz
- Sensitivity (1W/1m): 98 dB
- Voice Coil Diameter: 88 mm (3.5 inches)
- Winding Material: Aluminium
- Former Material: Glass Fibre
- Winding Depth: 21 mm (0.85 inches)
- Magnetic Gap Depth: 10.0 mm (0.39 inches)
- Flux Density: 1.05 T
- Connection: Spring Terminals

Design:
- Surround shape: Triple Roll
- Cone shape: Exponential
- Magnet material: Neodymium Inside Slug
- Spider: Double Silicone
- Pole design: T-Pole
- Woofer cone treatment: WP Waterproof Front Side
- Recommended enclosure: 40.0 dm³
- Recommended tuning: 65 Hz

Parameters:
- Fs: 51 Hz
- Re: 5.0 Ω
- Qes: 0.29
- Qms: 5.0
- Qts: 0.27
- Vas: 52.0 dm³
- Sd: 522.0 cm²
- η₀: 2.3 %
- Xmax: ± 8.0 mm
- Xvar: ± 9.5 mm
- Mms: 71.0 g
- Bl: 19.9 Txm
- Le: 1.3 mH
- EBP: 175 Hz

Physical:
- Overall diameter: 315 mm (12.4 inches)
- Bolt circle diameter: 298 mm (11.73 inches)
- Baffle cutout diameter: 282 mm (11.1 inches)
- Depth: 140 mm (5.51 inches)
- Flange and gasket thickness: 13 mm (0.51 inches)
- Air volume occupied by driver: 2.5 dm³
- Net weight: 4.8 kg