JTS 8 Way R-4 Rack System with 8 R-4TBM Beltpack Transmitters - Channel 38

The JTS 8 Way R-4 Rack System with 8 R-4TBM Beltpack Transmitters boasts superb operating distance and a one-touch set-up facility, REMOSET, which can set all parameters of the transmitter within an effective distance of 10 metres or more. Controllable via REMOSET are functions including Frequency Data, RF Power, Sensitivity, Low Cut, Key Lock and User name.
These Multi-Channel systems are perfect where a reliable and durable solution is required whilst keeping the audio quality paramount. Perfect for Schools, Theatres, Houses of Worship and multi vocal/instrument bands. Built to the usual rugged JTS quality standard, the R 4 also features extremely low companding noise, cascadable power and antenna distribution and an optional slide-in re-chargeable transmitter station is available.
The transmitter section is available as either the JSS-4 handheld transmitter or the R 4TBM body pack transmitter. Both are manufactured to the highest standards for professional use, featuring rugged aluminium alloy chassis. The JSS 4 features interchangeable capsule modules compatible with other microphone brands, if required. As standard it comes with the newly developed JTS SAM-8WLN capsule which delivers outstanding performance while minimising handling noise.

JTS 8 Way R-4 Rack System with 8 R-4TBM Beltpack Transmitters - Channel 38 Features

JTS R-4 Quad Receiver:
- Bandwidth: 36 MHz
- 6 groups, each with up to 22 compatible preset channels
- 1,441 selectable individual frequencies
- RF output and mains voltage output for easily cascading up to 10 x R-4/5 receiver without additional splitter
- REMOSET technology for receiver/transmitter synchronisation
- Auto-scan function
- Pilot tone squelch and noise mute
- LED for indicating RF level and AF level
- Backlit display for indicating battery status of the transmitter, frequency setup, active antenna
- XLR output per channel, balanced
- XLR output and 6.3 mm output for mixed signal
- Switchable mic/line for single outputs and mixed outputs
- Metal housing

JTS R-4TBM Hand Held Transmitter:
- Suitable for combination with a headband microphone or an instrument microphone with 4-pole mini XLR connector
- Bandwidth: 36 MHz
- 6 groups, each with up to 22 compatible preset channels
- 1,441 selectable individual frequencies
- REMOSET technology for receiver/transmitter synchronisation
- Adjustable sensitivity (±15 dB)
- Lock function
- 6-level display for indicating battery status and low battery alert, backlit LCD
- Switchable transmitting power

JTS 8 Way R-4 Rack System with 8 R-4TBM Beltpack Transmitters - Channel 38 Specifications

- Carrier Frequency Range: Channel 38, 606.5 - 630 MHz (License Required)

JTS R-4 Quad Receiver:
- Audio frequency range: 50-18,000 Hz
- Channels: 4
- THD: < 0.6%
- Dynamic range: > 105 dB
- Admiss. ambient temp.: 0-40 °C
- Audio signal:
  - 630 mV/600 Ω XLR (line),
  - 63 mV/600 Ω XLR (mic),
  - 320 mV/600 Ω jack
- Power supply: 100-240 V/50-60 Hz
- Width: 485 mm
- Height: 44 mm
- Depth: 230 mm
- Weight: 2.65 kg
- Connections:
  - 4 x XLR, balanced
  - 1 x XLR, balanced
  - 1 x 6.3 mm jack (mixed out)

JTS R-4TBM Hand Held Transmitter:
- Audio frequency range: 50-18,000 Hz
- Channels: 1
- Operating time: > 20 h
- Admiss. ambient temp.: 0-40 °C
- Transmitting power: 10/50 mW
- Operating range: 120 m
- Power supply: 2 x batt. AA size (not supplied)
- Width: 62 mm
- Height: 80 mm
- Depth: 23 mm
- Weight: 95 g
- Connections: 4-pole mini XLR

- Carrier Frequency Range: Channel 38, 606.5 - 630 MHz (License Required)

JTS 8 Way R-4 Rack System with 8 R-4TBM Beltpack Transmitters - Channel 38 Kit Supplied With
- 2 x R-4 dual quad channel rackmount receiver
- 8 x Transmitters R-4TBM Body Pack
- 1 x 4U Shallow flight case
- 1 x 2U lockable rack drawer
- 1 x RTF UF 20 Rear to Front antenna kit

Please Note: this will be supplied as individual items boxed to reduce the risk of transit damaged - so you will need to assemble the receivers into the rack.

Set up Tip: ID / Label the radio transmitters channel 1 to X number, then tune the receivers as per the Group and Channel allocation table- Power up the transmitters 1 at a time and place them 3M away from the rack, you can then use the Remo set function to sync the transmitter to the Receiver