JBL AW566-BK 15-Inch 2-Way All Weather High Power Speaker, 600W @ 8 Ohms or 70V/100V Line - IP56, Black

The JBL AW566-BK 15-Inch 2-Way All Weather High Power Speaker is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H-1 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 60° x 60° coverage. The loudspeaker system can used in either the vertical or horizontal orientation. The enclosure is constructed of multilayer glass composite and is heavily braced to maximize lowfrequency performance. The 14-gauge stainless steel grille, backed with open cell foam and stainless steel mesh, provides excellent protection in the harshest environments. The system is equipped with a 400 W 70/100V transformer. A heavy-duty weather treated U-type mounting bracket is included and allows for easy installation on flat surfaces or in 90° corners. The AW566-BK is part of JBL's AE Series, a versatile family of loudspeakers intended for a wide variety of applications.

JBL AW566-BK 15-Inch 2-Way All Weather High Power Speaker Features

- Weather-Resistant, All Fiberglass Enclosure
- 60° x 60° Coverage
- 2265H-1 Differential Driver Low- Frequency Driver
- 2432H High Frequency Compression Driver
- Large PT Progressive Transition waveguide for excellent pattern control and low distortion
- Available in Gray and Black finish
- 400 W, 70/100V Transformer Included
- U-type Mounting Bracket Included

JBL AW566-BK 15-Inch 2-Way All Weather High Power Speaker Specifications

- Frequency Range (-10dB): 35 Hz - 20 kHz
- Frequency Response (±3 dB): 54 Hz - 18 kHz
- Coverage Pattern: 60° x 60°
- Directivity Factor (Q): 15.8
- Directivity Index (DI): 12 dB
- Crossover Frequency: 1.1 kHz
- System Power Rating: 600 W (2400 W peak), 100 hrs
- Maximum SPL (1m): 128 dB-SPL cont avg (134 dB peak)
- System Sensitivity (1w @ 1m): 100 dB SPL
- Transformer Taps:
  - 70V: 400 W, 200 W, 100W
  - 100V: 400W, 200W
- LF Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
- Nominal LF Driver Impedance: 8 ohms
- LFD Sensitivity (1W @ 1m, within operational band): 98 dB SPL
- HF Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
- Nominal HF Driver Impedance: 8 ohms
- Sensitivity: 113 dB SPL
- Waveguide: PT-H66HF-1
- Enclosure: Hand-Laminated Fiberglass, gray gelcoat (black available)
- Suspension Attachment: 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
- Grille: Three layer grille assemblies consisting of 14-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
- Input Connector: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
- Environmental: IP56 per IEC 529
- Dimensions (H x W x D in horizontal cabinet orientation): 485 x 810 x 478 mm(19.1 x 31.9 x 18.8 in)
- Net Weight (each): 28.3 kg (62.5 lb)
- Crossover Modes: Passive