Home Audio PA Speakers B&C Speaker Components B&C Speaker Component Drivers B&C 10NW64 10-Inch Speaker Driver - 300W RMS, 16 Ohm
B&C 10NW64 10-Inch Speaker Driver - 300W RMS, 16 Ohm
The B&C 10NW64 10-Inch Speaker Driver boasts legendary B&C technology made with their famously critical quality control, allowing loudspeaker designs with appropriately scaled performance.
Click Here for Printer Friendly Version
B&C 10NW64 10-Inch Speaker Driver Features- 600 W continuous program power capacity- 64 mm (2.5 inch) copper voice coil- 60 - 2500 Hz response- 96 dB sensitivity- Neodymium magnet allows a very light yet powerful motor assembly- Shorting copper cap for extended HF response- Ventilated voice coil gap for reduced power
B&C 10NW64 10-Inch Speaker Driver Specifications- Nominal Basket Diameter: 250 mm (10 inches)- Nominal Impedance: 16 Ω- Nominal Power Handling: 300 W- Continuous Power Handling: 600 W- Frequency Response: 50 - 2500 Hz- Sensitivity (1W/1m): 96.0 dB- Voice Coil Diameter: 64 mm (2.5 inches)- Winding Material: Copper- Former Material: Glass Fibre- Winding Depth: 16.0 mm (0.62 inches)- Magnetic Gap Depth: 8.0 mm (0.31 inches)- Flux Density: 1.25 T- Connection: Spade TerminalsDesign:- Surround shape: Double Roll- Cone shape: Exponential- Magnet material: Neodymium Inside Slug- Spider: Single- Pole design: Straight Pole- Woofer cone treatment: TWP Waterproof Both Sides- Recommended enclosure: 26.0 dm³- Recommended tuning: 53 HzParameters:- Fs: 50 Hz- Vas: 27.5 dm³- Sd: 320.0 cm²- η₀: 1.3 %- Xmax: ± 8.0 mm- Xvar: ± 10.0 mm- Mms: 47.0 gPhysical:- Overall diameter: 261 mm (10.3 inches)- Bolt circle diameter: 245 mm (9.6 inches)- Baffle cutout diameter: 230 mm (9.1 inches)- Depth: 113 mm (4.55 inches)- Flange and gasket thickness: 13 mm (0.5 inches)- Air volume occupied by driver: 1.5 dm³- Net weight: 2.9 kg
Further Product Information Below
B & C 10NW64 Technical Drawing (PDF)
Buy Now