Home Audio PA Speakers B&C Speaker Components B&C Speaker Component Drivers B&C 10NDL64 10-Inch Speaker Driver - 250W RMS, 4 Ohm, Spade Terminals
B&C 10NDL64 10-Inch Speaker Driver - 250W RMS, 4 Ohm, Spade Terminals
The B&C 10NDL64 10-Inch Speaker Driver boasts legendary B&C technology made with their famously critical quality control, allowing loudspeaker designs with appropriately scaled performance.
Click Here for Printer Friendly Version
B&C 10NDL64 10-Inch Speaker Driver Features- 500 W continuous program power capacity- 64 mm (2.5 inch) aluminium voice coil- 50 - 3000 Hz response- 97 dB sensitivity- Waterproofed cone- Neodymium magnet allows a very light yet powerful motor assembly- Ventilated voice coil gap for reduced power compression
B&C 10NDL64 10-Inch Speaker Driver Specifications- Nominal Basket Diameter: 250 mm (10 inches)- Nominal Impedance: 4 Ω- Nominal Power Handling: 250 W- Continuous Power Handling: 500 W- Frequency Response: 50 - 3000 Hz- Sensitivity (1W/1m): 97 dB- Voice Coil Diameter: 64 mm (2.5 inches)- Winding Material: Aluminium- Former Material: Glass Fibre- Winding Depth: 14.0 mm (0.55 inches)- Magnetic Gap Depth: 8.0 mm (0.31 inches)- Flux Density: 1.25 T- Connection: Spade TerminalsDesign:- Surround shape: Double Roll- Cone shape: Exponential- Magnet material: Neodymium Inside Slug- Spider: Single- Pole design: Straight Pole- Woofer cone treatment: TWP Waterproof Both Sides- Recommended enclosure: 26.0 dm³- Recommended tuning: 62 HzParameters:- Fs: 56 Hz- Vas: 31.0 dm³- Sd: 320.0 cm²- η₀: 1.8 %- Xmax: ± 6.0 mm- Xvar: ± 7.0 mm- Mms: 37.0 gPhysical:- Overall diameter: 261 mm (10.3 inches)- Bolt circle diameter: 245 mm (9.6 inches)- Baffle cutout diameter: 230 mm (9.1 inches)- Depth: 113 mm (4.55 inches)- Flange and gasket thickness: 13 mm (0.5 inches)- Air volume occupied by driver: 1.5 dm³- Net weight: 2.9 kg
Further Product Information Below
B & C 10NDL64 Technical Drawing (PDF)
Buy Now