Vector DFP2300 Power Amplifier, 2x 1200W @ 4 Ohms

Vector DFP2300 Power Amplifier Features

- 19-inch 2U rack-mountable
- Balanced XLR inputs and line out link connections
- Speakon and binding post outputs
- Can be used in stereo, parallel and bridged mono modes

Vector DFP2300 Power Amplifier Specifications

- Power Output Level:
  - RMS @ 8-Ohm Stereo: 750W + 750W
  - RMS @ 4-Ohm Stereo: 1200W + 1200W
  - RMS @ 2-Ohm Stereo: 1400W + 1400W
  - RMS @ 8-Ohm Bridge: 2200W
  - RMS @ 4-Ohm Bridge: 2700W
- Phase Response (1W,20Hz - 20KHz at 8-Ohm): +10
- Total Harmonic Distortion (THD+N) 20Hz - 20kHz, Half Power: <0.1%
- Frequency Response (1W/8-Ohm): 20Hz - 20kHz - 1dB @ 1kHz+1dB
- Slew Rate: 35V/us
- Intermodulation Distortion (IMD) 60Hz:7kHz,4:1, Half Power: <0.03%
- Channel Seperation (Half Power, RL= 8-Ohm, 1kHz Vol Max, Input 600-Ohm shunt): >60dB
- SN Ratio: 95dB
- Damping Factor (8-Ohm, 1f=1kHz): 600
- Sensitivity (Vol. Max) (Rated Power into 8-Ohm): 0.775V/1.0V1.44V
- Input Impedance (balanced/unbalanced): 20K Ohm/Balanced, 10K Ohm/Unbalanced
- Controls:
  - Front Panel: Power Switch (On/Off), Volume/CH
  - Rear Panel: Sensitivity switch, operation mode switch, grounding switch, filter switch
- Input Connectors (Per channel): Female & Male XLR (Pin 2+, configurable for pin 3+, ground 1+)
- Output Connectors (Per channel): 5-way blinding posts or speakon connectors
- LED Indicators (Per channel): Protect/clip/signal/active/bridge/parrallel
- Protection Circuit: Short cicuit protection, overload protection, DC protection, soft start, hi temperature protect limiter
- Class: H
- Fuse: 20A
- Power Supply: AC-240V, 50Hz
- Cooling: Two step cooling fan controlled by temperature

Physical:
- Dimensions (W x H x D): 483 x 89 x 366 mm
- Packing Dimensions (W x H x D): 550 x 520 x 145 mm
- Weight: 21 Kg