SigNET AC AKM1 Meeting/Seminar Room Induction Loop Kit with SigNET PDA200E Amplifier and APM Plated Microphone

SigNET AC AKM1 Meeting/Seminar Room Induction Loop KitSigNET AC APM Outreach Plate with Omni-Directional Plated Microphone Features

SigNET AC PDA200E Amplifier
- A powerful and very cost-effective induction loop amplifier designed to drive a perimeter loop of up to 200 square metres
- Fully compliant with BS 7594, clause 10 A3 and BS EN 60118-4 when correctly installed
- Also available in a wide range of kit formats - suitable for use in meeting rooms, waiting rooms, TV?lounges, health and fitness suites, churches, etc
- Up to 200 metres (metal free) coverage - ideal for most 'free space' applications
- Features TWO balanced/unbalanced line level inputs and one microphone input with phantom power for electret microphones
- Ideal for electrical contractors - no audio connectors or experience required
- Metal compensation control to improve intelligibility in rooms with high metal content

SigNET AC APM Plated Microphone
- Self-contained omni-directional electret microphone complete with onboard mic to line level converter
- Typical coverage up to 25m² (ambient) or 2.5m (direct speech) when located at a ceiling height of 2.5-3m
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair audio cable is ideal for most applications
- Network lengths of 100m easily achievable with no degradation of sound quality
- Built-in pre-amp, mixer and level controls included on all variants
- Overcomes the need for excessively long microphone and audio leads
- 12-32V dc operation
- +6dB overload capability
- Surface mountable on 25mm UK single gang back boxes
- Effectively acts as a multi-point distributed mixer with individual level controls
- Optional wall-mounting 'AFILS ACTIVE' and magnetic field strength indicators available for use with audio-frequency induction loop systems

SigNET AC AKM1 Meeting/Seminar Room Induction Loop Kit Specifications

SigNET AC PDA200E Amplifier
- Induction Loop Type: Wall mounting, requires fixed mains wiring
- Coverage: 200m² approx
- Inputs:
  - 1x Microphone
  - 2x Line/Outreach
- Indicators:
  - Input level
  - Power
  - Compression
  - Peak Current (3,2,1)
- Controls:
  - Metal Compensation
  - Input level
  - Loop drive

Physical (amplifier only):
- Dimensions (W x H x D): 273 x 200 x 77mm
- Weight: 2.82kg

SigNET AC APM Plated Microphone
- Supply volts: 12 to 37V regulated DC
- Supply current: 6 to 11mA
- Signal to noise ratio: >60dB
- THD + noise: <0.03%

Physical:
- Dimensions (W x H): 85 x 85mm
- Weight: 0.096kg

Further Product Information Below

SigNET AC AKM1 Data Sheet (PDF)

SigNET AC PDA200E Manual (PDF)

SigNET AC PDA200E Installation Guide (PDF)

SigNET AC AKM1 Meeting/Seminar Room Induction Loop Kit Supplied With

- SigNET AC PDA200E Amplifier
- SigNET AC APM Plated Microphone
- 'AFILS fitted' sticker