SigNET AC AKL1 Lecture Room Induction Loop Kit with SigNET PDA200E Amplifier, AMT and AML Microphones

SigNET AC AKL1 Lecture Room Induction Loop Kit Features

SigNET AC PDA200E Amplifier
- A powerful and very cost-effective induction loop amplifier designed to drive a perimeter loop of up to 200 square metres
- Fully compliant with BS 7594, clause 10 A3 and BS EN 60118-4 when correctly installed
- Also available in a wide range of kit formats - suitable for use in meeting rooms, waiting rooms, TV?lounges, health and fitness suites, churches, etc
- Up to 200 metres (metal free) coverage - ideal for most 'free space' applications
- Features TWO balanced/unbalanced line level inputs and one microphone input with phantom power for electret microphones
- Ideal for electrical contractors - no audio connectors or experience required
- Metal compensation control to improve intelligibility in rooms with high metal content

SigNET AC AML Gooseneck Electret Cardioid Microphone
- Cardioid microphone
- Designed to be positioned on a lectern plinth
- 275mm gooseneck
- Features two pre-drilled holes in the round base for fixing
- Compatible with SigNET PDA series induction loop equipment
- 3.5mm mono jack plug

SigNET AC APJ Outreach Plate with 3.5mm Jack Socket for Electret Microphone Input
- Accepts unbalanced electret microphones with 3.5mm mono jack plugs
- Includes an onboard mic to line level converter, high gain pre-amplifier and 8V phantom power
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair audio cable is ideal for most applications
- Network lengths of 100m easily achievable with no degradation of sound quality
- Built-in pre-amp, mixer and level controls included on all variants
- Overcomes the need for excessively long microphone and audio leads
- 12-32V dc operation
- +6dB overload capability
- Surface mountable on 25mm UK single gang back boxes
- Effectively acts as a multi-point distributed mixer with individual level controls
- Optional wall-mounting 'AFILS ACTIVE' and magnetic field strength indicators available for use with audio-frequency induction loop systems

SigNET AC AKL1 Lecture Room Induction Loop Kit Specifications

SigNET AC PDA200E Amplifier
- Induction Loop Type: Wall mounting, requires fixed mains wiring
- Coverage: 200m² approx.
- Inputs:
  - 1x Microphone
  - 2x Line/Outreach
- Indicators:
  - Input level
  - Power
  - Compression
  - Peak Current (3,2,1)
- Controls:
  - Metal Compensation
  - Input level
  - Loop drive

Physical:
- Dimensions (W x H x D): 273 x 200 x 77mm
- Weight: 2.82kg

SigNET AC AML Gooseneck Electret Cardioid Microphone
- Frequency response: 100Hz to 10kHz
- Power required: 5V phantom power
- Sensitivity: -63dB

SigNET AC APJ Outreach Plate with 3.5mm Jack Socket for Electret Microphone Input
- Supply volts: 12 to 37V regulated DC
- Supply current: 6 to 11mA
- Input signal level: -40dBu to -30dBu
- Input gain control: ∞ to 0dB
- Input impedance: 500Ω
- Phantom volts: 11V/0V (link selectable)
- Signal to noise ratio: >60dB
- THD + noise: <0.07%

Physical:
- Dimensions (W x H): 85 x 85mm
- Weight: 0.98kg

Further Product Information Below

SigNET AC AKL1 Data Sheet (PDF)

SigNET AC PDA200E Manual (PDF)

SigNET AC PDA200E Installation Guide (PDF)

SigNET AC AKL1 Lecture Room Induction Loop Kit Supplied With

- SigNET AC PDA200E Amplifier
- SigNET AC AMT Lavalier/Desk Microphone
- SigNET AC AML Fixed Gooseneck Microphone
- 2x SigNET AC APJ Outreach Plate with 3.5mm Jack Socket
- 'AFILS fitted' sticker