SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level
The SigNET AC APXM Outreach Plate with 3-Pin Female XLR Input at Microphone Level accepts balanced or unbalanced microphones with standard 3 pin XLR connectors. Includes an on-board mic to line level converter, high gain pre-amplifier and 8V phantom power.
SigNET's Outreach Plate audio input extension system comprises a range of wall, ceiling and desk mountable single gang audio input plates specifically designed to increase the audio input capability of an induction loop system. Covering the most common variants of audio connector, they work by mixing the signals from various audio input sources into one balanced line level input which can be fed into the line input of a compatible amplifier.
Mountable on 25mm back boxes, each plate features a built-in mixer, pre-amp, input level control and balanced output. The fact they can be installed at the most convenient point on an installation overcomes the need for long and potentially hazardous microphone/audio leads.
Typically, up to 10 Outreach plates (any mix) can be daisy-chained to one balanced line level input with cable lengths of up to 100m easily achievable using standard two-pair audio cable with no recognisable degradation of audio signal quality.
Each outreach plate requires four wires, two balanced line (A+, A-), one ground (0V) and one power connection (12-32 V DC regulated).
Click Here for Printer Friendly Version
01271862221
