Nexo NANONXAMP4-D Powered Digital Controller/Amplifier with Dante, 2x 500 W @ 8 Ohms

Nexo NANONXAMP4-D Powered Digital Controller/Amplifier with Dante Features

- Dante-equipped speaker controller and four channels of power amplifier in a 1U, 1/2 rack
- Four Balanced (+ unbalanced) Analog inputs (line or microphone level), SPDIF digital in/out
- Four channel Class-D amplifiers with ultra-low distortion for uncompromised sound quality, 4 x 250 Watts/4 ohms
- Universal Power Supply (100~240 Volts) using PFC technology for best efficiency and smooth current drawn
- Remote control through integrated WiFi Access Point or through the ethernet port

Nexo NANONXAMP4-D Powered Digital Controller/Amplifier with Dante Specifications

Power Specifications:
- Power Specifications: 4x amplifier channels, 2 by 2 bridgeable
- Number of channels: 4x 70 Volts
- Max. output voltage (no load): 4x 200 Watts
- Max. output power (4 channels mode /4 Ohms load per channel): 4x 250 Watts
- Max. output power (2 channels mode /8 Ohms load per channel): 2x 500 Watts
- Power consumption (Idle): 20 Watts
- Power consumption (Standby): <2 Watts
- Power consumption (Standby without network): <0.5 Watts

Input to Power Out Specifications:
- Frequency response: +0/-0.25 dB from 20 Hz to 20 kHz
- Input impedance / Input Sensitivity: 20 K Ω / +13 dBU
- Dynamic range / TDH + N: >106 dB A-weighted / <0.05% on a flat setup
- Latency: 1 ms on a flat setup
- Audio AD and DA Converters: 24 bits @ 48 kHz
- Processing: 64 bits processing DSPs

Back Panel Features:
- Analog audio inputs: 4x balanced analogue inputs on Euroblock 3.5 mm pitch or unbalanced on RCA
- Power outputs: 4x Euroblock 5 mm pitch outputs
- Digital audio input/output: 1x SPDIF 2ch input/output on RCA
- 1x DanteTM 4ch input
- GPIO port: 1x Euroblock 3.5 mm pitch with 4x Global purpose Inputs and 1x Global purpose Output
- Network inputs: 1x 100 Mb Ethernet port (Remote control)
- Mains sockets: 1x IEC C14 socket

Front Panel and Remote Control:
- Front panel LEDs: 5x LEDs (WiFi / Network / Output / Input / Status)
- Remote control: Through 100 Mb Ethernet port or through integrated WiFi (Access Point or client)

Electrical:
- Mains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50/60 Hz)
- Power consumption 1/8 max. 4 Ω: 250 Watts

Certification / Qualification:
- Electrical safety certification: IEC62368-1 2nd edition and UL62368-1
- EMC certification: FCC Part 15 Class B, CAN/CSA-CISPR 22-10, EN55032/CISPR32, EN61000
- Green status: Compliant with ROHS & Reach directive

Physical:
- Dimensions (W x H x D): 44.5 x 220 x 296 mm (1.75 x 8.66 x 11.65 inches), 1U - ½ 19-inch rack width
- Weight: 2.8 kg (6.2 lbs)

Further Product Information Below

Nexo NANOXAMP4 Data Sheet

Nexo NANOXAMP4 Brochure