JBL Control 30 10-Inch 3-Way High Output Indoor/Outdoor Monitor Speaker, 250W @ 8 Ohms or 70V/100V Line - IPX5, White

JBL Control 30 10-Inch 3-Way High Output Indoor/Outdoor Monitor Speaker Features

- Extended bandwidth, extremely smooth frequency response.
- Fully outdoor-capable design, featuring WeatherMax.
- 120° x 110° HF coverage.
- 150 W transformer for 70 V or 100 V lines, with 8 thru.
- SonicGuard overload protection.
- 250 mm (10 in) fiberglass / Kevlar cone LF woofer, with neodymium magnet coaxial 125 mm (5 in) anodized aluminum cone MR, and 25 mm (1 in) titanium diaphragm compression driver.
- Includes InvisiBall mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
- Sealed input panel cover and screw-down input terminals

JBL Control 30 10-Inch 3-Way High Output Indoor/Outdoor Monitor Speaker Specifications

- Frequency Range: 38 Hz - 17 kHz (-10 dB)
- Power Capacity: 500 W Continuous Program Power; 250 W Continuous Pink Noise
- Transformer Taps:
  - 70 V: 150 W, 75 W, 38 W, 19 W
  - 100 V: 150 W, 75 W, 38 W
- Thru Position: 4 ohms nominal
- Frequency Response: 40 Hz - 16 kHz ( ± 3 dB)
- Maximum SPL (1m): Short-Term: 123 dB; Long-Term: 117 dB
- Sensitivity: 93 dB, 1W @ 1m (3.3 ft)
- Coverage Angle: 120° H x 110° V
- Directivity Factor (Q): 5.2 dB, averaged 500 Hz to 10 kHz
- Directivity Index (DI): 7.1 dB, averaged 500 Hz to 10 kHz
- Impedance: 4 ohms
- Crossover Network: 3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF, 3rd order High Pass, HF, plus conjugate shaping circuitry.
- Drivers:
  - LF: 250 mm (10 in) fiberglass/Kevlar cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet
  - MF: 125 mm (5 in) anodized aluminum cone with EPDM rubber (Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in) voice coil on fiberglass former
  - HF: 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
- Enclosure: High Impact PolyStyrene (HIPS) with 10% glass fill plus patent pending internal 5 mm foamed polyurethane secondary mold
- Grille: Thermoset composite coated steel, WeatherMax multi-layer foam
- Overload Protection: SonicGuard full range power limiting to protect network and transducers.
- Outdoor Capability: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
- Input Connectors: Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open
- Safety Agency: Transformer is listed per UL1876
- Colors: Black or white (-WH)
- Dimensions (H x W x D): 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in.)
- Net Weight (each): 18.9 kg (42 lb)
- Shipping Weight (ea): 20.3 kg (45 lb)
- Optional Accessories:
  - MTC-30CM (-WH) to install speaker down from the ceiling
  - MTC-30UB (-WH) U-Bracket

Further Product Information Below

JBL Control 30-WH Data Sheet (PDF)

JBL Control Contractor Series Manual (PDF)

JBL Control Contractor Series Brochure (PDF)

JBL Control 30 10-Inch 3-Way High Output Indoor/Outdoor Monitor Speaker Supplied With

- JBL Control 30 speaker
- InvisiBall wall-mounting base
- MTC-PC2 input panel cover
- 6 mm x 305 mm InvisiBall hex wrench