Crown DCi4 300DA 4-Channel Install Amplifier with Dante, 300W @ 4 Ohms or 70V / 100V Line

Crown DCi4 300DA 4-Channel Install Amplifier with Dante Features

- Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network
- HiQnet Audio Architect software allows for remote configuration
- Digital Signal Processing - DSP capabilities include the following:
  - LevelMAX Limiters
  - Input/Output EQ
  - Crossover
  - Delay
  - Matrix Router
  - Speaker Line Monitoring
- Integrated Dante / AES67 Networked Audio - Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager
- Network Configuration, Monitoring & Control - Better monitoring, control and audio manipulation with the HiQnet protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers
- Programmable General Purpose Input/Output Port - GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system

Crown DCi4 300DA 4-Channel Install Amplifier with Dante Specifications

- Redundant Dante ports:
  - Primary
  - Secondary
  - Will accept 48khz or 96khz
  - Capable of sending out Dante audio from analog inputs pre/post processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP:
  - 48kHz processing
  - 20 Presets
  - Input router
- High, medium, and low priority inputs:
  - Input delay up to 2s
  - Input EQ
  - Crossover
  - Output EQ
  - Output Delay up to 100ms
  - LevelMAX limiter
  - Load Monitoring
- Pilot tone:
  - Normal
  - Burst
- Continuous Load Monitoring
- Sweep Load Monitoring:
  - Channel Auto-Standby
  - Speaker Tunings
- Aux-Port:
  - Sleep contact closure
  - Amp Status output
- Removable air filters
- Front panel LED indicators

Power:
- Dual-Mode - All Channels Driven
  - 2Ω: 150W
  - 4Ω: 300W
  - 8Ω: 300W
  - 16Ω: 150W
  - 70Vrms: 300W
  - 100Vrms: 300W
- Bridge Mono - All Channels Driven
  - 4Ω: 300W
  - 8Ω: 600W
  - 16Ω: 600W
  - 140Vrms: 600W
  - 200Vrms: 600W

Physical:
- Dimensions (W x H x D): 483 x 89 x 362 mm
- Weight: 9.12 kg

Further Product Information Below

Crown DCi DA Series Manual (PDF)

Crown DCi Series Data Sheet (PDF)

Crown DCi Series Brochure (PDF)