Audio Technica ATW-1311 System 10 PRO Dual Rack Mount 2.4GHz Body Pack System

Audio Technica ATW-1311 System 10 PRO Dual Rack Mount 2.4GHz Body Pack System Features

- 2.4 GHz 24-bit / 48kHz Digital wireless system
- No interference, as operates outside of DTV or 3G bands
- Automatic Frequency Selection. Plug & Play. Ease of use and reliability
- Offers 3 levels of diversity (frequency, time and space) to ensure communication without interference
- Rackable metal chassis, comes with a removable receiver (Kit setting rack included)
- Supplied with 2 extractable receivers in the chassis, and two bodypack transmitters
- Users can pair each receiver with up to 10 transmitters
- 2 frames or 4 receivers can fit in a 19-inch 1U rack
- Possibility to chain up to 5 frames (10 receivers) using RJ12 type cables (one cable per system)
- Up to 10 systems can be used simultaneously without any frequency coordination problems or group selection
- Hi-Fi audio quality over the whole frequency range (20 Hz to 20 kHz)
- No compression during transmission and reception for clear, natural sound

Audio Technica ATW-T1001 System 10 2.4GHz Digital Bodypack Transmitter Features

- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Designed for performing musicians and presenters
- Easy setup and clear, natural sound quality
- Extremely easy operation and instantaneous channel selection
- Eight channels may be used together without any frequency coordination problems
- Easy-to-read digital ID display
- The transmitter is powered by two AA batteries and features a sliding battery compartment cover that also protects the internal controls from being accidently activated
- Equipped with a recessed 4-pin HRS-type locking input connector
- A power/mute button on the top of the unit allows for the transmitter to be easily muted or turned on and off
- Dual-colour LED power/battery/mute indicator

Audio Technica ATW-1311 System 10 PRO Dual Rack Mount 2.4GHz Body Pack System Specifications

- Carrier Frequency Range: 2.4 GHz (License Free)

- Frequency Response: 20 Hz to 20 kHz Depending on microphone type
- Operating Range: 60 m (200 feet) Open range env. with no interfering signals
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
- Audio Sampling: 24 bit / 48 kHz
- Latency: 3.8 ms
- Receiving System: Diversity (frequency/time/space)
- Output Connectors (Microphone): Remote Receiver Connector: RJ45 Link Connector: RJ12
- Maximum Output Level: XLR, balanced: 0 dBV ¼-inch (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
- Dimensions (W x H x D): 96.8 x 44.2 x 122.8 mm
- Weight: 0.42 kg

Audio Technica ATW-T1001 System 10 2.4GHz Digital Bodypack Transmitter Specifications

- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Battery Type: Two 1.5V AA
- Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
- Dimensions (W x H x D): 70.2 x 107 x 24.9 mm

Further Product Information Below

Audio Technica System 10 Pro Manual (PDF)

Audio Technica System 10 Pro Data Sheet (PDF)

Audio Technica System 10 Pro Brochure (PDF)

Audio Technica ATW-1311 System 10 PRO Dual Rack Mount 2.4GHz Body Pack System Supplied With

- 1x Audio Technica ATW-RC13 Receiver Chasis
- 2x Audio Technica ATW-RU13 Receiver Module
- 2x Audio Technica ATW-T1001 Body Pack Transmitters (Microphones sold separately)